zum Warenkorb hinzugefügt:

wheel covers Installation

Remove the Hubcap:

  1. Grasp the edge of the hubcap firmly with both hands
  2. Pull the hubcap firmly in your direction to loosen the retaining clips.

Installation Guide

  1. Remove the original Tesla wheel cover hubcap.
  2. Attach foam tape to the inner edge of each hubcap.
  3. Align the value stem hole with the value stem on the wheel.
  4. Firmly press the cover onto the wheel. Push down until each clip is secure.
  5. Continue to press firmly around the wheel until it is flush with the tire.
  6. Before driving, make sure each hubcap is securely flush.