TESEVO 18" V-Spoke Wheel Covers for Tesla Model 3 Standard 2026+ | 4 PCS
Secure payment options
TESEVO 18" V-Spoke Wheel Covers for Tesla Model 3 Standard 2026+ | 4 PCS
18-inch V-Spoke Wheel Covers for Model 3 Standard
A sharper look for your Model 3 Standard, without replacing its factory wheels. Refresh all four corners with a matching set of painted ABS covers, available in three distinctive finishes.
Check your wheels before ordering
- Fits: 2026+ Tesla Model 3 Standard with the original 18’’ Prismata Wheels
A coordinated refresh, in the details
Choose your finish, confirm your factory wheel design and give all four wheels the same V-spoke character.
A new look. Your original wheels.
Refresh your Model 3 Standard with a sculpted V-spoke design while keeping the compatible factory alloy wheels underneath. These painted ABS covers replace the original wheel covers for a coordinated cosmetic upgrade—not a replacement wheel or tire.
Three finishes, one distinctive design
Choose Gloss Black for reflective contrast, Matte Black for a more understated look, or Black & Silver to highlight the V-spoke pattern. Each finish uses the same wheel-specific fitment and comes as a matching set of four.
A dedicated opening for the tire valve
The cover includes a valve opening for access during tire-pressure checks. Align this opening with the valve when fitting the cover, then seat the attachment points evenly.
All four wheels, one consistent finish
One set supplies four matching covers in your selected finish, so the complete vehicle gets the same V-spoke look. There is no need to mix finishes or buy individual covers to complete the set. Wheels, tires and Tesla-branded emblems are not included.
Product details
One wheel-specific fitment. Three finishes. Four matching covers.
Specifications
- VehicleTesla Model 3 Standard/base
- Wheel fitmentOriginal 18-inch Standard wheels
- MaterialPainted ABS
- DesignV-spoke wheel cover
- Finish optionsGloss Black / Black & Silver / Matte Black
- Quantity4 covers per set
What’s included
- 4 × matching wheel covers in your selected finish
Aftermarket replacement covers only. Alloy wheels, tires, brake components and Tesla-branded emblems are not included.
Fit carefully. Check before driving.
Use the correct wheel design and allow the wheels to cool before installation.
Prepare the wheel
Park on a level surface. Remove the original covers using the vehicle-specific guidance, then clean and inspect the wheels.
Align and seat evenly
Line up the valve opening and press evenly around the attachment points until the cover is fully seated. Do not force an uneven fit.
Check all four covers
Inspect every edge before driving and recheck after the first short drive. Stop if unusual force is needed or any cover does not sit evenly.
These covers are a cosmetic accessory, not a repair for a damaged wheel. Seek installation help if the fit or attachment is unclear.
Frequently asked questions
Will these fit any 18-inch Model 3 wheel?
No. They fit the original 18-inch wheel design on the Model 3 Standard/base configuration introduced in late 2025 and commonly sold as the 2026 model year. They do not fit 18-inch Aero or Photon wheels, 19- or 20-inch wheels, or aftermarket wheels. Check the wheels currently installed on your car, not only the model year or tire size.
Are these wheels or wheel covers?
These are aftermarket painted ABS wheel covers for a cosmetic refresh. They are not alloy wheels, tires or Tesla OEM parts, and do not change the structural condition of the underlying wheel.
What is included?
Four matching wheel covers in the finish you select: Gloss Black, Black & Silver or Matte Black. Wheels, tires, brake components and Tesla-branded emblems are not included.
Will they improve range or prevent curb damage?
Choose these covers for their V-spoke styling and coverage. They are not sold with a guaranteed range improvement or an impact-protection rating, and are not a substitute for repairing damaged wheels.
How should I clean and remove them?
Clean with mild car shampoo and a soft cloth; avoid harsh solvents and abrasive brushes. When removing a cover, release it progressively around the perimeter rather than pulling on one decorative spoke.
Real feedback from the TESEVO community